Sailnboat
Destinations

90–120 Day Sailing Route from England to Australia: Key Stages

A practical 90–120 day plan for an England→Australia delivery: major stages, port services, leg distances and realistic duration ranges so you can route, provision and schedule with confidence.

Sailnboat Editorial
· 11 min read
Two men on the cockpit of a bluewater monohull at the helm and studying a paper chart on a rolling mid-ocean passage in late-afternoon light, with moderate swells and the horizon visible.

This is a practical, stage‑by‑stage 90–120 day plan for a sailing route from England to Australia. It gives the route split into operational legs, a ready table of distances and estimated underway durations at representative passage speeds, port choices for repairs and provisioning, seasonal windows and the safety / regulatory checks you must plan for before you leave.

Major Stages of the Route

The most useful way to think about an England→Australia delivery is as four distinct stages. Each has a different weather regime, provisioning profile and operational risk.

  • Stage 1 — North Atlantic exit and Canary Islands: leave a UK base and run south through Biscay, clear into the Azores High approaches and make landfall in the Canary Islands for final warm‑weather provisioning and checks. Typical staging port: Las Palmas (Gran Canaria). See leg table below for a typical distance used for planning.

  • Stage 2 — Canary Islands → Cape Verde → Brazil → South Atlantic: either stop in Cape Verde (Mindelo/Praia) to split the ocean leg, then make the trans‑Atlantic to northeastern Brazil (Salvador / Recife) and continue along the South American coast to a departure point for the South Atlantic crossing to South Africa. Classic southern Atlantic crossings require solid planning for trades and currents.

  • Stage 3 — South Africa and South Indian Ocean: landfall at Cape Town for haulout/repairs and then south‑east across the Indian Ocean via Mauritius (Port Louis) to Western Australia (Fremantle/Perth). This stage is sensitive to the SW Indian Ocean cyclone season; allow margin.

  • Stage 4 — Australian coastal leg: Fremantle/Perth to an eastern Australia destination (Sydney / Port Jackson) requires coastal passage planning, mandatory pre‑arrival reporting, and checks with the Australian authorities. The coastal transit is not a simple hop — expect 1,500–2,000 NM depending on your exact route around southern and eastern Australia and the islands you choose to visit.

Each stage should be treated as a mini‑voyage: file notifications, check local pilotage/port rules, top up spares and allow several weather reserve days.

Key Ports of Call

When you’re planning provisioning, repairs and potential weather stops, pick ports that reliably offer fuel, parts, mechanic/rigging services and secure berthing.

Port facilities and services (operational view)

  • Portsmouth (or the nearest UK deep‑water base): full marina & shipyard facilities, ready access to chandlers and spare parts prior to a long offshore passage. Arrange final provisioning and check spare prop, filters and an extra days’ fuel/food margin.

  • Canary Islands (Las Palmas / Puerto de la Luz): large marinas, diesel, local chandlers, sailmakers and reputable boatyards — the standard last stop before the Atlantic. Many rally fleets and delivery captains use Las Palmas as their staging port.

  • Cape Verde (Mindelo / Porto Grande, São Vicente): useful stop to split the Atlantic; provisioning is more limited than the Canaries but the marina supports diesel, water and basic repairs — haulout capacity is limited and hoisting can be expensive; plan repairs in Las Palmas or Cape Town if possible.

  • Salvador / Recife (Bahia / Pernambuco, Brazil): larger South American ports with shipyards and commercial marinas; good for reprovisioning, spares and a crew break. Confirm local formalities and agent availability well before arrival.

  • Cape Town (Table Bay / V&A Waterfront): preferred South African hub — extensive yards, secure marinas, specialist engine and composite work and easy logistics to order parts. You will also find reliable medical and security support. Expect strong local winds in summer (the south‑easter/Cape Doctor), and factor a weather window for safe crossing south of the Cape.

  • Port Louis, Mauritius: a practical Indian Ocean stop for fuel, parts and a weather break before the long run to Australia; customs and biosecurity formalities apply. Be aware Mauritius has an official cyclone season.

  • Fremantle / Perth and Sydney (Australia): major city ports with commercial yards, spare parts, pilots, customs/border agents and medical services — the logical end points for the voyage and places to carry out any post‑passage repairs and inspections. AMSA/ABF pre‑arrival protocols apply.

Always confirm marina services and hauling capacity before arrival — berthing fees, security and fuel availability vary by season and year.

Recommended Passage Legs

Below is a practical, commonly‑used leg plan with planning distances and estimated underway durations at two representative average speeds for an oceangoing sailboat (6 and 8 knots). These figures are for planning — real time at sea will vary by weather, routing and vessel type. Where a leg distance varies by departure point (for example which Canary island you leave from) a planning range is noted in the commentary.

Notes on speeds used for duration calculation:

  • 6 knots is a conservative average for heavily loaded bluewater monohulls on a long passage.
  • 8 knots is a practical average for lighter ocean racers or well‑powered modern cruising yachts; catamarans will often average a bit higher. Use the column that best matches your vessel’s sustained passage speed.
Leg (typical ports) Distance (NM, planning) Time @ 6 kt (days) Time @ 8 kt (days) Notes
Portsmouth → Las Palmas (Gran Canaria) 1,600 NM 11.1 d 8.3 d Typical UK→Canaries routing; distance varies by departure port and whether you route via Biscay.
Las Palmas → Mindelo (Cape Verde) 850 NM 5.9 d 4.4 d Classic southern Atlantic staging leg; many cruisers sail ~780–870 NM depending on island of departure.
Mindelo → Salvador (Brazil) 2,350 NM (plan range 2,200–2,600 NM) 16.3 d 12.2 d Exact routing depends on target (Salvador vs Recife) and how far south you go to catch trades and avoid calms.
Salvador → Cape Town (South Africa) 3,150 NM (plan range 3,000–3,300 NM) 21.9 d 16.4 d Long south‑Atlantic leg: current, routing for favourable winds and avoiding storm systems determine the best track.
Cape Town → Port Louis (Mauritius) ~2,230 NM 15.5 d 11.6 d Great‑circle planning figure for Cape Town → Port Louis; operators report 2,200–2,400 NM depending on routing.
Port Louis → Fremantle (Perth) ~3,202 NM 22.2 d 16.7 d Long Indian Ocean transit — a key weather/route decision because of cyclone season and swell direction. NGA distance reference used for planning.
Fremantle → Sydney (coastal transit) ~1,880 NM 13.1 d 9.8 d Coastal leg length depends on exact route (southern bight vs more direct offshore routing); allow time for coastal pilotage and reporting.

Underway totals (planning sum of the distances above): about 15,260 NM.

  • Total underway days at 6 kt: about 106 days; at 8 kt: about 79 days.
  • Add port days (provisioning, repairs, weather) and you reach a 90–120 day programme in most realistic plans. The final total depends heavily on your average boat speed, number of weather days you choose as margin, and whether you extend any stopovers for repairs or visas.

Trade‑offs:

  • Faster boats shorten underway time but raise fuel/consumption and increase the chance of arriving into a port with unserved formalities outside office hours.
  • More stops increase logistics complexity but reduce exposure to long offshore failures and give time to re‑stock spares.

Seasonal Weather Patterns

Timing is the single most important strategic decision for this voyage. Each ocean basin has a separate seasonality that must be respected.

  • Atlantic (Canaries → Cape Verde → Brazil): the northeast trades that make a southern route practical are most reliable from late autumn into spring in the northern hemisphere; leaving the Canaries too late in the year increases the chance of encountering the Azores High and calms, or Atlantic storm systems if you depart too early. Many delivery skippers stage in winter/spring to catch reliable trades for the Atlantic crossing.

  • South Atlantic approach to South Africa: there is no single “hurricane” risk, but frontal systems and variable wind/wave regimes occur and you want the crossing scheduled to avoid the worst of the Southern Ocean westerlies; many skippers choose to arrive at Cape Town in austral autumn so they avoid Cape summer wind spikes.

  • Cape Town local winds: expect strong southeasterly winds (the “Cape Doctor”) in spring and summer (roughly October–April). If your plan requires work in Cape Town or departures around the cape, aim for the gentler months (autumn to early winter).

  • Mauritius & SW Indian Ocean cyclone season: the official season runs roughly November to mid‑May (peak Jan–Mar for Mauritius), so avoid planning a direct Port Louis → Fremantle crossing that places you in the SW Indian Ocean during the heart of cyclone season. If you must transit during the season, build large weather windows and have a secure plan for sheltering in a well‑equipped harbour.

  • Australian coastal seasons: the approach to Western Australia and the coast to Sydney is influenced by seasonal currents, offshore swell and local winds — plan coastal legs around the Australian Bureau of Meteorology seasonal outlook and ensure all pre‑arrival reporting timelines are met well in advance.

Operational rule of thumb: build 1–3 weather reserve days per long ocean leg and keep your itinerary flexible — longer is cheaper than emergency diversion.

Navigational Challenges

Expect different hazards in each stage; plan for them specifically.

  • Long‑ocean fatigue and single‑point failures: the long ocean legs (2,000–3,200 NM) expose you to engine or rigging failures that need immediate spares onboard (filters, belts, an emergency rudder plan, redundant steering lines). Carry a minimum toolkit and spares kit sized for 21+ day legs. This is non‑negotiable on a 90–120 day plan.

  • Cape of Good Hope currents and seas: the Agulhas current and wind interactions can produce confused seas and steep waves close to the Cape — consult local pilot guides and avoid hugging the coast; use conservative routing and allow daylight for coastal passages near the Cape.

  • Trade‑wind routing and the Azores High: the Atlantic crossing may require an initial southward dogleg to find steady trades; don’t try a straight rhumb line if the forecast predicts the Azores High position will block the trades. Pay attention to weather and routing: a longer but faster trade‑wind track can beat a shorter rhumb‑line in terms of elapsed time.

  • Cyclone and storm avoidance in the SW Indian Ocean: track Météo‑France / Mauritius Met Service bulletins and build a tested plan for seeking shelter or running south/west out of the cyclone belt if warnings form.

  • Security: historically higher piracy/armed robbery risks have been reported in parts of West Africa and sections of the Indian Ocean, though trends have changed — maintain contact with IMB/UKMTO and adopt bridge‑team anti‑boarding measures where advised. Register and report suspicious approaches; have a citadel and alarm plan.

  • Charts and navigation aids: keep up‑to‑date ENCs and paper charts for every planning region; many route decisions require checking local coastal notices (AUSCOAST, NAVAREA warnings, Notices to Mariners) before arrival.

Safety Protocols and Regulations

Before you leave and as you progress, follow a consistent safety and compliance checklist.

  • Vessel safety equipment: EPIRB (checked and registered), liferaft(s) serviced within the valid window, SOLAS‑standard lifejackets with lights, drogue/sea anchor for heavy weather, fire suppression, bilge alarms and redundant bilge pumps. Ensure periodic servicing records are aboard.

  • Communications and watchkeeping: HF or satellite for oceanic distance communications, AIS, dual VHF, SSB or satcom, and a daily fixed‑time position reporting schedule to your owner/operator and an onshore agent. Confirm that LRIT/AIS obligations (if any) are met for your vessel class. Keep an emergency contact card for each crewmember.

  • Pre‑arrival reporting — Australia (example of detailed pre‑arrival rules you must plan for): Australian customs/immigration/biosecurity require pre‑arrival notifications (Ship Pre‑Arrival Report/Form 13 and quarantine pre‑arrival as QPAR/eQPAR) with standard minimum lead times (commonly 96 hours prior to first Australian port for a foreign voyage, with shorter lead times allowed for shorter preceding legs). Follow the published procedures and submit forms to ABF/DAWR/AMSA as required; arriving without proper reports can delay berth approval and pratique.

  • Visas and crew documentation: check visa rules for each country you will visit well in advance — holders of some passports require visas in advance for Brazil, South Africa or Australia; crew changes are subject to both national immigration and ship reporting rules. Distinguish between what port authorities ask for at check‑in (charter practice) and what national law requires: these may differ.

  • Insurance and claims: confirm your P&I and hull cover for long ocean passages and that your insurance policy covers transit regions and any offshore security risk. Missing the qualifications a charter company or insurer requires can affect how a claim is assessed — if in doubt, clarify with your insurer and flag state.

  • Security reporting: if transiting areas with advisory warnings, report to UKMTO and IMB PRC and comply with any recommended routing or speed measures. Keep evidence of reports and any CSO (Commercial Security Officer) arrangements.

  • Medical and evacuation planning: carry a modern, well‑stocked medical kit and a plan for medevac options at each stage; consider a satellite medical subscription and pre‑arranged agreements with shipping agents at major ports for medevac assistance.

Practical checklists and planning tips (brief)

  • Pre‑departure (UK): final spares, engine service, sails inspection, liferaft/EPIRB/pyrotechnics check, medical kit and a full set of paper charts for the route.
  • On arrival into each major port: change currency at official outlets, restock fresh produce, top up diesel and water, check haulout availability (Cape Town/Las Palmas have good facilities), and refuel with at least a 10–20% reserve for the next long leg.
  • Weather monitoring: subscribe to a reliable GRIB/satellite service and a coastal forecast service for each basin; check synoptic charts daily on ocean legs.
  • Crew rotation and rest: for a delivery of this length plan at least one shore leave stop of 3–5 days to reduce fatigue‑driven mistakes.
  • Spare parts priority list: alternator, raw‑water pump, injectors or fuel pump spares, engine belts, sail repair kit, spare propeller shaft couplings where applicable.

Final operational advice: this is a commitment of scale — choose your window, make conservative speed and weather assumptions for fuel and spare usage, and accept that allowing three extra weeks for weather/repairs will save money in diversions and emergency work.

Frequently Asked Questions

Divide the voyage into four big stages: (1) England → Canary Islands → Cape Verde, (2) Cape Verde → Brazil → South Atlantic → South Africa, (3) Cape Town → Mauritius → Indian Ocean crossing to Western Australia, (4) coastal transit from Perth (Fremantle) to Sydney. Each stage has distinct weather, provisioning and regulatory issues.

Duration depends on average hull speed and weather. For planning use 6–8 knots for an ocean-capable monohull: a 1,600 NM leg is ~8–11 days; 3,000 NM is ~16–21 days. See the leg table in the article for computed ranges at 6 and 8 knots.

Aim to leave England so your South Atlantic crossings and Cape Town passage fall outside the Cape summer southeaster peak, and schedule the Indian‑Ocean crossing to arrive in Mauritius/Fremantle outside the SW Indian Ocean cyclone season (roughly November–mid‑May for Mauritius).

Long ocean fetches, strong currents and wind funnels around the Cape of Good Hope, variable trade wind strength on the Atlantic crossing, cyclone risk in the SW Indian Ocean, and coastal traffic and pilotage requirements approaching major Australian ports.

Key service hubs for this routing: Portsmouth (full marine services) or another UK departure base; Las Palmas (Gran Canaria) for final European provisioning; Mindelo/Praia (Cape Verde) for limited but useful services; Salvador/Recife for South American services; Cape Town (full yacht support and haulout); Port Louis (Mauritius) for refuel/repairs; Fremantle/Perth and Sydney for major repairs and reprovisioning.

Carry SOLAS‑level safety kit appropriate to the vessel size (EPIRB, liferaft serviced to date, AIS, backup comms), maintain a watch and passage plan, file international voyage notifications (see Australian pre‑arrival rules), keep insurance and required certificates current, and follow security reporting (IMB/UKMTO) in higher‑risk regions.

Sailnboat Editorial

Written by

Sailnboat Editorial

The Sailnboat editorial desk covers yacht and boat chartering worldwide — routes, bases, seasons, boat types, paperwork and the practical costs that decide a trip. We are a charter marketplace, not a boat owner or a local agency: what we sell is judgement and support, so our guides are written to help you make a decision, not to sell you a specific boat. Every guide is checked against live operator and marina data before it goes out.

Fact-checked against live operator and marina data, and published under our editorial standards. Last reviewed: .